Why universities may need a mobile phone signal booster


It’s safe to say that the world is quite reliant on mobile communication for almost everything and this includes places of higher education. This means that if things go bad as far as signal strength, those in need will have a lot of issues on multiple fronts. This is why a mobile phone signal booster for university is needed to curb the problem according to UCtel. So why do companies use these particular tools and not others?


The following will get into exactly that, with an examination of the technology in university. You’ll also see the potential factors for requiring a mobile phone signal booster in universities settings.

Boosters: how they work

To understand the need for such tools in universities, you need a brief look at what they are and how they operate. Your standard booster is a device that is used to amplify weak mobile phone signals from cell towers and transmit them to users within a building. In this way, mobile phone signal boosters for universities can be thought of as it performs the same function identically. As such, everything from the way it’s built to how it’s installed will be mostly the same, save for differences in topography.


To function, this device is built with three components in mind. Below is a look at each component, its function as well as how it would fit into any setting:

  • Exterior antenna: this component is responsible for receiving signals from cell towers and is usually placed on the highest point of a building;
  • Amplifier: also known as the booster, it strengthens the signal and is placed in the building, usually where it’s needed;
  • The interior antenna: this receives the amplified signal via transmission and sends it throughout the designated area, although multiple can be spread throughout in places they’re needed.


If the institution is proficient in service provision, the entire installation process should be easier as they fit into any structure. This is also another reason why many would choose them over fiber-optic cables, which usually require some serious defacing of buildings to be fitted.


The standard booster is also compatible with multiple networks. This is especially helpful when it comes to large areas with a high population of mobile users such as universities, office spaces, and hospitals amongst others.

What could cause bad signals

Universities aren’t at all immune from problems regarding poor mobile signals. Several factors can be pointed to as to why these places in particular experience bad cell service and poor internet amongst other things. The most common include the following:

  • poor weather 
  • long distance from the closest tower
  • building composition which may include brick or metal
  • cellar or underground facilities
  • excess cell traffic
  • geographical features such as mountains and trees


When we speak about universities, just about every factor listed above can be applied to them as they can be built with hindering materials and in places with dead zones. Universities also tend to have underground facilities such as auditoriums as well as hundreds of students using their phones for various things. This alone proves that they need the amplifiers to ensure everyone from students to faculty and other employees have unimpeded reception.

Why high educational institutions need boosters

As previously discussed, there are various reasons that can be identified to explain the poor or complete blocking of signals at universities. While this partially clarifies the need for mobile phone signal boosters in a university environment, a closer examination of a few evident aspects will provide further insight into this requirement:

For general communication

Whether it’s within the often large campuses or in distant places, communication is an essential part of life even outside of university activities. As such, anything that can make it better is most welcome regardless of where. Booster technology just so happens to be a bit of a leader amongst some of the choices out there.

In cases of emergency

As in all places, some things are likely to go wrong in universities. This may include things such as general security threats and medical incidents regarding anyone on the premises. In such situations, it’s important to have a quick response, to ensure that nothing worsens.


This is where a mobile phone signal booster for university would come in handy. The nature of signal strength is that it could become poor at any point, turning an area into a dead zone, which isn’t ideal.

To streamline the learning experience

It’s pretty obvious that signal strength doesn’t just affect telecommunication and that the internet plays just as big of a role if not bigger. It is especially useful when it comes to research and poor network connection due to the listed reasons could be a major inconvenience. It’s for this reason that boosters could be helpful, which they show in spades during moments when research is conducted by the masses at the same time.

Steel structures with bad signal

Many educational institutions, especially in the UK, have various old buildings that were constructed using materials like steel or concrete walls, which can hinder cellular signals. Simply such materials just block or weaken phone signals. By using signal boosters, various establishments can solve this matter.

Countryside or rural locations

Some institutions are located in remote areas or in the villages or park areas with bad signal, especially if we speak about mountains where cellular coverage may be limited. Here signal boosters come in place and become vital in extending coverage. Students and staff could stay connected regardless of the geographical remoteness.

Final thoughts

Some would say that a university’s ability to provide some consistency as it pertains to mobile signals should be looked at when judging its quality. Fortunately, having tech such as a mobile phone signal booster for university settings is something that can help with that. The fact that these tools are versatile and can fit any building setup makes them an ideal choice. This along with the fact that they are usually able to allow multiple network providers.

Having said that, figuring any of this out is something that’s best left to those who have experience in the field. The installation process, for example, can only go smoothly if a provider proves to be capable of it as well as able to work in any situation. This means that universities in need of boosting the signals in their vicinity will have to find the right partner.



Please enter your comment!
Please enter your name here